If this is your first visit, be sure to check out the FAQ by clicking the link above. You may have to register before you can post: click the register link above to proceed. To start viewing messages, select the forum that you want to visit from the selection below.
DISCLAIMER: The load data contained on this site is intended for use with specific components. Substituting manufacturers components may not produce equivalent pressure or velocities; therefore, it is recommended that the user be familiar with the basic rules of reloading safety. Safety folders are available from the National Re-loading Manufacturers Association (NRMA) and the Sporting Arms and Ammunition Manufacturers Institute (SAAMI). All can be obtained free by writing:

NRMA/SAAMI Safety Folders
One Centerpointe Drive
Suite 300
Lake Oswego, Oregon 97035

Data contained herein is intended for use by individuals who are familiar with correct and safe handloading practices and procedures. We strongly urge beginning handloaders to research and study as much information as possible prior to handlloading. If you are unfamiliar with any reloading operation or procedure we strongly recommend you become familiar with the operation of your equipment through the manufacturer's operator's manual and seek technical assistance. Because IHMSA Networks has no control over the individual loading practices and/or components used, no responsibility is assumed by IHMSA Networks nor its owners for use of this data. The information is to be used at the sole discretion of the user and the user assumes all risk. IHMSA Networks has not independently verified the accuracy of the data contained on this site. Failure to follow safe loading practices could result in severe personal injury (including death) or gun damage to the user or bystanders. Technical data and information contained herein are intended to provide information based upon the limited experience of individuals under specific conditions and circumstances. They do not detail the comprehensive training, procedures, techniques and safety precautions that are absolutely necessary to properly carry on similar activity. Always consult comprehensive reference manuals and bulletins for details of proper training requirements, procedures, techniques and safety precautions before attempting any similar activity. Be alert- publisher cannot be responsible for errors in published load data.