Lets see your Bolt Guns

[BurmKiller]

Ernie - Everyone here has searched for guns in Google, including non IHMSA guns. Think of what you searched for. Add those pics and descriptions. I will do the work to make sure the engines discover those key words. Then just keep the discussions active to keep new viewers interested and with any luck we get new IHMSA members!

[xphunter]

Works for me. I would be happy if me non-IHMSA handguns helped open the door to new IHMSA members

[ChargerFan]

Here's another XP-100, crafted by Ralph Bond in 1990...

I love the barrel on that one. Not only does it look cool, but it's making me drool!

[IHMSA80x80]

Found this Bond XP-100 on Gunbroker a few years ago, in 7mm International.
2296Bond7INT18..JPG

The stock went to Kevin Baker to be done in a 1970 Plymouth Sassy Grass. Kevin did a great job, as always.
2296Bond7INT80_1..JPG2296Bond7INT79..JPG

http://www.refinishit.net/

[IHMSA80x80]

An early Calfee XP-100 Silhouette pistol in 7mmBR. This went into a nice wood stock I got from Mike Dewey.
49Calfee7BR..JPG

[IHMSA80x80]

My second Calfee XP .22LR conversion, found at the IHMSA Internationals in Ohio, 2002. Mike Dewey installed one of his excellent triggers in it, and I shot it with the factory black stock for a year, until this maplewood stock became available from Mike. This is Calfee serial number 8.
49Calfee8q..JPG

[IHMSA80x80]

Cooper M36 pistol in .22LR, 5-shot magazine.
2296Cooper22LR..JPG

[IHMSA80x80]

Remington Custom Shop XP in .22BR, Burris 3-9x scope.
49XP22BR15..JPG

[IHMSA80x80]

A couple of factory 7mmBR XP's, the black stocked one is original 1980 introduction.
2296RemXP7mmBR3..JPG2296RemXP7mmBR39..JPG

[IHMSA80x80]

Original .221 Fireball with the addition of Bomar/Lansing sights. Too bad they don't allow this in Production anymore, it was a lot of fun to shoot.
49XP221x..JPG

[IHMSA80x80]

Weatherby CFP 6mm-08, B&L Elite3200 2-6x scope.
49Wby243a10..JPG

[IHMSA80x80]

Found this XP in 6x47, which turned out to have an unsafe barrel...The flutes were done too deep into the chamber walls, leaving only 0.155" metal at the shoulder junction.
2296XP6476..jpg


Mark Penrod rebuilt it in .308 Winchester. HS Stock done in GM Red Tint by TM Stockworks.
2296XP308Win111..JPG

[IHMSA80x80]

The old Bond XP in 6.5BR needed a new barrel, which was done by OTT, same caliber, and the scope was upgraded.
229609190048..JPG

[IHMSA80x80]

XP-100 6mmBR with Lilja barrel, 4x Burris and McMillan stock.
2296XP6BR72..JPG

[IHMSA80x80]

XP-100R in 6.5-08 with Leupold 2.5-8x scope. Stock done by TM Stockworks in blue metallic.
49XP6508..JPG

[IHMSA80x80]

An unknown gunsmith re-barreled this one in 7mm TCU, and it came with the shorty stock. The barrel brand is also unknown, but it shoots like a house on fire. Another fine wood stock from Mike Dewey really transformed it.
49XP7tcu..JPG2296XP7TCU82..JPG

[IHMSA80x80]

Remington Custom Shop XP-100R in .350 Remington Magnum. One of the last to leave the shop, I just felt like I had to have it. Came with the Bomar rear sight installed. This is great fun in Unlimited Half-Scale. The stock was the first one I had done by Kevin Baker, in 1970 Dodge Panther Pink.
2296XP350z80..JPG

[IHMSA80x80]

I never really wanted a .35 Remington in an XP, much less a repeater, but this one was a blow-out price of $299, new, so I couldn't resist. I figured I would re-barrel it someday, and for that price, I couldn't find an action anywhere close to that. Then I made the mistake of putting sights on it and shooting it. Turns out to be pretty accurate...I call it my "Lite" .35, since I already had the .350 Remington Magnum. The stock went to Kevin Baker again, for a special treatment. Another fantastic job he did for me.
2296XP35REM56..JPG

http://www.refinishit.net/

[fatelvis]

80X80, that metallic blue XP-100R is very nice. I have a stock one in .223, and would like to paint it the same color. Did the people who redid it use the original stock, or is that a whole new stock?

[IHMSA80x80]

Thanks...that is the original stock.